+86-15666836565
China Hot Melt Edge Sealant - Eco-Friendly Adhesive from Trusted Suppliers & Factory
Applicable to
- Fully automatic edge banding machine;
- Edge banding process between solid wood, density board, particle board, etc. and veneer, PVC.
Features
- Low glue consumption, good fluidity, no drawing, good thermal stability, high bonding strength;
- Excellent high temperature resistance.
- No harmful substances such as formaldehyde.
Precautions
- The moisture content of the substrate is 8-12%, the substrate is free of dust and grease, and the substrate accuracy (flatness) should be controlled within 0.1MM;
- The amount of glue should be moderate. Too much will reduce the drying speed, resulting in drawing and dirty boards. Too little will cause local glue shortages, resulting in weak bonding;
- Be sure to conduct edge sealing related experiments before mass production.
Safety matters
Machines and equipment in the workplace must be equipped with partial exhaust devices and eyewash and cleaning equipment.
Construction workers should wear work clothes and heat-resistant glasses to protect their eyes, and wear impermeable gloves and boots; To prevent burns, if you are accidentally scalded, please immerse the scalded area in cooling water to cool down. If it is serious, you should seek medical attention in time.
Technical parameters
Base material
EVA resin
Appearance
off-white granules
Viscosity
80000±5000cps (200℃)
Glue coating amount
160-240g/㎡
Softening point
115±5℃ (ring and ball method)
Operating temperature
180-210℃
Roller pressure
3-5kg/cm2
Feed speed
15-40m/min
Packaging
Net weight 25kg/bag
Storage
It needs to be stored in a dry and cool place at room temperature. The storage period is 24 months.
Frequently Asked Questions
What type of machinery is this edge banding adhesive suitable for?
This adhesive is designed specifically for fully automatic edge banding machines.
What are the primary materials that can be bonded?
It is ideal for edge banding processes between solid wood, density board, particle board, etc., and veneer or PVC.
What is the recommended operating temperature and feed speed?
The optimal operating temperature range is 180-210℃, and the recommended feed speed is 15-40m/min.
What substrate preparations are necessary before application?
The substrate moisture content must be maintained at 8-12%. The surface must be completely free of dust and grease, and the flatness accuracy of the substrate should be controlled within 0.1MM.
How should the edge banding adhesive be stored?
It should be stored in a dry and cool environment at room temperature. Under these conditions, the storage period is 24 months.