+86-15666836565
China Factory Suppliers Two-Component Plywood Glue for Superior Bonding and Waterproofing Solutions
Product Introduction
Plywood glue refers to an adhesive used to splice wood products such as integrated materials. It is suitable for plywood bonding of non-structural materials and structural materials. The main of plywood glue is a specially made polyvinyl acetate emulsion with excellent waterproof effect, and the curing is generally isocyanate. The color is a milky white viscous liquid as the main, and the curing is light brown. The main of plywood glue can generally be used alone as a finger-joined glue.
Plywood of ebony, cherry, red oak, white oak, yellow rose, black walnut and other woods.
In line with GB18583-2008 standard; good bonding strength, water resistance, weather resistance and solvent resistance, all indicators meet international industry standards—European D4 standard and Japanese JAS standard.
Environment and wood temperature 6-35°C, wood moisture content 8-12%, curing ratio 100:15 (weight ratio), wood precision error.
Common Problems of Two-Component Plywood Glue
Insufficient curing ratio: Curing ratio should be strictly maintained at 100:10 (softwood) : 15 (hardwood).
Excessive board moisture content: The moisture content of the board is too high (standard moisture content is 8-12%, and the difference in moisture content of adjacent wood must be less than 1%).
Inadequate board precision: The board precision is not enough, uneven processing, knife marks, pollution, etc., resulting in the actual bonding surface being smaller than the required bonding surface (board precision).
Improper pressing parameters: Insufficient or uneven pressurization pressure (softwood 6-10kg/cm2, hardwood 10-15kg/cm2).
Low operational temperatures: The environment, wood, and adhesive temperature are too low (recommended above 6°C).
Frequently Asked Questions (FAQ)
The standard curing ratio by weight is 100:15 generally. For specific materials, the ratio is 100:10 for softwood and 100:15 for hardwood.
The wood moisture content should be maintained between 8% and 12%, with the difference in moisture content between adjacent wood pieces kept below 1%.
It complies with the GB18583-2008 standard and meets international performance requirements including the European D4 standard and Japanese JAS standard.
Apply a pressurization pressure of 6-10 kg/cm² for softwood and 10-15 kg/cm² for hardwood to ensure optimal bonding contact.
The operational temperature for the environment, wood, and adhesive should be between 6°C and 35°C (recommended strictly above 6°C).
Yes, the main component (milky white polyvinyl acetate emulsion) can generally be used independently as a finger-jointed glue.


